Pipeline ID Cleaning
Internal Pipe Blasting Equipment blasts mill scale and rust from pipe internals.
EnquireSand Blasting
Internal pipe blasting equipment eliminates rust, dust, and other debris from the inaccessible interior side of pipes fast, effectively, and consistently. Internal Pipe Blasting Machine is used to remove corrosion from the inside of pipes.
Browse full product photos, component close-ups, and application views.
Review the key product specifications used for quotation and application planning.
Watch how the machine performs in real blasting and surface preparation conditions.
Internal pipe blasting equipment eliminates rust, dust, and other debris from the inaccessible interior side of pipes fast, effectively, and consistently. Internal Pipe Blasting Machine is used to remove corrosion from the inside of pipes.
Internal Pipe Blasting Equipment centering gear is set for the pipe internal diameter.
The blast head is inserted into the pipe bore.
The tool rotates or is withdrawn at a set speed while blasting.
Abrasive hits mill scale and rust on the internal wall.
Fines and spent media are recovered from the pipe run.
The internal surface is checked before lining or coating.
Internal pipe blasting equipment eliminates rust, dust, and other debris from the inaccessible interior side of pipes fast, effectively, and consistently. Internal Pipe Blasting Machine is used to remove corrosion from the inside of pipes. The procedure is straightforward: a blast pipe is fitted with a pipe tool, which is withdrawn from one end of the pipe to the other. The innovative blast method used by Spray Blast applies an even, 360° blasting stream to the interior wall, creating a consistent blast pattern ready for any coating.
Internal pipe blasting equipment from Spray Blast removes corrosion, dust, and other debris from inaccessible locations inside piping fast, effectively, and dependably. The procedure is straightforward: a sand blasting hose is fitted with a pipe tool, which is withdrawn from one end of the pipe to the other. Spray Blast's innovative blasting process applies an even, 360° blasting stream to the inner wall, resulting in a consistent blast pattern that is ready for any coating.
Sizing the pipe precisely is required before selecting the appropriate pipe tool. Smaller inner pipe sizes up to 300 mm are best handled using a tool that creates a 360° blast pattern using a deflection tip. We offer a Spin blast tool for pipes with inner dimensions of more than 304 mm, which uses a revolving blast head to give a high-impact, uniform blast finish. Spray Blast pipe blasting equipment can be used on pipe interiors with diameters up to 1500 mm.
The Tublast is intended to clean the inside of pipes with internal diameters ranging from 3" to 12" (76mm to 300mm).
The blast pattern on the tungsten carbide nozzle is circular 360°. The interior nozzle comes in two sizes: 13mm and 16mm.
The Tublast can be attached to the blast hose directly using a CHE-2 (art no:401186) nozzle holder or a CFT coupler.
The Rotoblast is intended for cleaning the interior of pipes with internal diameters ranging from 12" to 35" to 900mm.
The tool has a revolving head, is powered by compressed air, and incorporates a brake system.
The tool is guided through the pipe by an adjustable centering carriage. For various pipe diameters, the chart below illustrates the recommended centering legs, Sand Blasting nozzle sizes, and compressor capacity.
Compare Internal Pipe Blasting Equipment with other models in Sand Blasting.
| Specification | Sand Blasting Stencil | This model Internal Pipe Blasting Equipment | Abrasive Blasting Machine |
|---|---|---|---|
| Product | Sand blasting Stencil | — | Abrasive Blasting Machine |
| Material | Polyester Liner/Rubber Adhesive and Backing | Mild Steel | Mild Steel |
| Material Size | 300, 350, 400, 500, 550, 600um, 1.0mm | — | — |
| Glue Thickness | 40um | — | — |
| Length(m) | 10m-20m | — | — |
| Width(cm) | 122cm, 120cm, 60cm, 30cm | — | — |
| Adhesive | ~ 35g/m² | — | — |
| Release Liner | ~ 140g/m² | — | — |
| Brand | Spray Blast | Spray Blast | Spray Blast |
| Color | Grey, Transparent Pink, Light Green | As per client requirement | As per client requirement |
| Country | India | India | India |
| Packaging Type | Bubble Wrapping | — | — |
| Transport Type | Land/Sea/Air Transport | Land / Sea / Air Transport | — |
| Price Range | Rs 1000-1500/Roll | Rs 45 K - 5 Lakh | Rs 4-8 Lakh |
| Grade | — | Semi Automatic | — |
| Power Source | — | Pressure | — |
| Compressed air (80 - 100 psi) | — | 85 - 226 CFM | — |
| Pipe Dia. | — | 50 - 1500 mm | — |
| Nozzle | — | Tungsten Carbide | — |
| Nozzle Size | — | 6 / 8 mm | — |
| Cleaning Capacity | — | 5 -6 square meter/hour | — |
| Delivery Time | — | 10-15 Days | 1-2 Weeks |
| Production Capacity | — | 4-5 | 4 Machine |
| Packaging Details | — | Polly Pack With Bubble Packing | Polly Pack With Bubble Packing |
| Machine Grade | — | — | Manual and Automatic |
| Frequency | — | — | 50Hz |
| Voltage | — | — | 440V |
| Power | — | — | 12.5hp |
| Delivery Type | — | — | Ship/Air/Land |
Typical applications for Internal Pipe Blasting Equipment across industrial blasting, coating, and surface preparation work.
Internal Pipe Blasting Equipment blasts mill scale and rust from pipe internals.
EnquireInternal surfaces are profiled before lining.
EnquireShort lengths and bends are cleaned in the shop.
EnquireIn-service pipe is restored before inspection.
EnquireCarbon steel pipe IDs are blasted before epoxy lining.
EnquireSelected tools clean tube IDs where access allows.
EnquireMill varnish and scale are removed before coating.
EnquireInternal blast follows girth welds when specified.
EnquireAnswer a few questions and we will suggest a starting configuration for Internal Pipe Blasting Equipment — then confirm the exact specification with our team.
Clear answers on specification, usage, and what to expect before you request a quote.
Tell us the application, quantity, and delivery need for Internal Pipe Blasting Equipment.
Tell us the product, application, quantity, or repeat supply requirement for steel shot, steel grit, garnet abrasive, glass beads, or related blasting media.
